HAMMER MILL
30/80 Hammer Mill Mesh Griding Plant
A hammermill is a mill whose purpose is to shred or crush aggregate material into smaller pieces by the repeated blows of little hammers. This plant finds its application in grinding Quartz. Feldspar and Limestone into Granule form. The mineral lumps are crushed in the Jaw Crusher to convert them into Granular form. This granule is than stored in Silo with the help of conveyor bel. Silo with the help of conveyor belt feeds the grains in disintegrator. The disintegrator grinds the grains by iron bitters and discharges the granule powder between the Gap Rod. The material discharged by the disintegrator is lifted by the elevator and is screened by the rotary screen and the corus material is again feed into the disintegrator by the Reefed conveyor belt. The screened material is made free from iron by permanent Magnate and different mesh sized Finished product is readier with the help of Vibrator Screen. The Pulse Jet Fabric Bag House System sucks and gathers the fine dust and polluted air and discharges Fresh air with the help of blower.
Electric Motor Requirement In 30/80 Mesh Grinding Plant
| S.No. | Name of Machine | HP | RPM | No. |
|---|---|---|---|---|
| 1 | Jaw Crucher size 9" x 16" | 15 | 960 | 1 |
| 2 | Conveyor Belt | 2 | 960 | 2 |
| 3 | 42" Disinticator | 25 | 960 | 1 |
| 4 | Bucket Elevator | 5 | 960 | 1 |
| 5 | Rotary Screen | 3 | 960 | 3 |
| 6 | Blower | 15 | 1440 | 1 |
| 7 | Permanent Magnet Separator | 1 | 960 | 2 |
| 8 | Vibrator Screen | 2 | 960 | 2 |
| 9 | Refeed Conveyor | 1 | 960 | 1 |
| 10 | Rotary Valve | 1 | 960 | 1 |
| 11 | Compressor | 3 | 960 | 1 |
Electric Motor Requirement In 30/80 Mesh Grinding Plant
| Mesh Size | Partical Size | Prod. capacity(Per Hour) |
|---|---|---|
| 0 to 2 mesh | 0 mm to 9 mm | 4 M.T. |
| 0 to 4 mesh | 0 mm to 4 mm | 3.5 M.T. |
| 0 to 16 mesh | 0 mm to 1 mm | 2.5 M.T. |
| 0 to 20 mesh | 0 mm to 0.8 mm | 2 M.T. |
| 0 to 30 mesh | 0 mm to 0.6 mm | 1.8 M.T. |